A technical guide to district heating (FB 72)
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
On 2 December 2014, BRE published A technical guide to district heating (FB 72) by Robin Wiltshire, Jonathan Williams and Paul Woods.
District heating (DH) allows centralised heat sources to be connected to distributed heat consumers. Typically it comprises; one or more energy centres, the pipe network, and connections to consumers. The high heat loads compared to individual, independent systems allow economies of scale and smoother demand, leading to more efficient operation of the energy centre. It also allows the use of heat sources that would not be viable at a smaller scale.
FB 72 presents comprehensive information outlining system and component design, operation and maintenance. The 54 page guide is largely an update of Good Practice Guide 234, Guide to community heating and CHP, but it has been extended to emphasise the importance of other low-carbon sources of heat other than combined heat and power (CHP) including thermal renewable energy.
The guide focuses on technical rather than financial issues and will be useful for anyone involved in the technical aspects of district heating networks, whether on new or refurbishment schemes.
Its contents include:
- Executive summary.
- Introduction.
- What is district heating?
- System design.
- Component design.
- Operations and maintenance.
- References.
- Relevant standards, codes of practice and publications.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BSRIA guide to heat interface units.
- Building Research Establishment.
- Combined heat and power.
- Community energy network.
- Geothermal energy.
- Heat interface units.
- Heat meter.
- Heat Networks Investment Project HNIP.
- Municipal energy - briefing sheet.
- National heat map.
- Water source heat map.
- What can government do about district heating.
Featured articles and news
Solar generation in the historic environment
Success requires understanding each site in detail.
Level 6 Design, Construction and Management BSc
CIOB launches first-ever degree programme to develop the next generation of construction leaders.
Open for business as of April, with its 2026 prospectus and new pipeline of housing schemes.
The operational value of workforce health
Keeping projects moving. Incorporating unplanned absence and the importance of health, in operations.
A carbon case for indigenous slate
UK slate can offer clear embodied carbon advantages.
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.